10,000lbs capacity.
• Dual hydraulic direct-drive cylinders made to a high standard.
• Aero cable used for synchronization.
• Single-point manual safety release mechanism, disengages both columns simultaneously from one side.
• Self-lubricating UHMW Polyethylene sliders.
• Clear-floor design provides unobstructed floor use.
• Overhead safety shut-off device prevents vehicle damage.
• Stackable rubber pads and 1.5”, 3”, 5” adapters as standard supply.
• Standard two height settings accommodate varying ceiling heights.
• Toe guards and tool trays come as standard.
Certificate ALI Certified Lock Release Single Point Release
Warranty2 YEAR
Lifting Capacity10,000 LB
Overall Height143 3/4" (HL2-10KALIX)
166" HEIGHT EXTENSION NON CERTIFIED
Overall Width140 7/16" (narrow spacing)
146 3/8" (medium spacing)
152 1/4" (wide spacing)
Maximum Lift height with Truck Adapters78"
Maximum Lift height without Truck Adapters69"
Minimum Height of Adjustable Pads from Ground4"
Drive Through Width (Carriage to Carriage)88 1/8" (narrow spacing)
94 1/16" (medium spacing)
100" (wide spacing) Column to Column Width97 1/8" (narrow spacing)
103 1/16" (medium spacing)
109" (wide spacing) Driving Mode Direct Drive Motor
220V Single Phase 3HP 10A (recommend a 30A breaker)
Time to full rise50 seconds Hydraulic Oil3-5 gallons AW32/AW46 (not included)Truck Adapters3 sets: 1 1/2", 3", and 6" tall Front Arms3 Stage reach from 19 5/16" to 41 7/8"Back Arms3 Stage reach from 37 5/16" to 60 3/16"Column Steel Thickness1/4"Carriage Steel Thickness1/4"Carriage Yoke Thickness9/16"Arm Steel Thickness1/4"Base Plate Steel Thickness13/16"Shipping Weight
Concrete Requirement6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below) ModelHL2-10KALIX
10,000lbs capacity.
• Dual hydraulic direct-drive cylinders made to a high standard.
• Aero cable used for synchronization.
• Single-point manual safety release mechanism, disengages both columns simultaneously from one side.
• Self-lubricating UHMW Polyethylene sliders.
• Clear-floor design provides unobstructed floor use.
• Overhead safety shut-off device prevents vehicle damage.
• Stackable rubber pads and 1.5”, 3”, 5” adapters as standard supply.
• Standard two height settings accommodate varying ceiling heights.
• Toe guards and tool trays come as standard.
Certificate ALI Certified Lock Release Single Point Release
Warranty2 YEAR
Lifting Capacity10,000 LB
Overall Height143 3/4" (HL2-10KALIX)
166" HEIGHT EXTENSION NON CERTIFIED
Overall Width140 7/16" (narrow spacing)
146 3/8" (medium spacing)
152 1/4" (wide spacing)
Maximum Lift height with Truck Adapters78"
Maximum Lift height without Truck Adapters69"
Minimum Height of Adjustable Pads from Ground4"
Drive Through Width (Carriage to Carriage)88 1/8" (narrow spacing)
94 1/16" (medium spacing)
100" (wide spacing) Column to Column Width97 1/8" (narrow spacing)
103 1/16" (medium spacing)
109" (wide spacing) Driving Mode Direct Drive Motor
220V Single Phase 3HP 10A (recommend a 30A breaker)
Time to full rise50 seconds Hydraulic Oil3-5 gallons AW32/AW46 (not included)Truck Adapters3 sets: 1 1/2", 3", and 6" tall Front Arms3 Stage reach from 19 5/16" to 41 7/8"Back Arms3 Stage reach from 37 5/16" to 60 3/16"Column Steel Thickness1/4"Carriage Steel Thickness1/4"Carriage Yoke Thickness9/16"Arm Steel Thickness1/4"Base Plate Steel Thickness13/16"Shipping Weight
Concrete Requirement6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below) ModelHL2-10KALIX
